News

News

JSW Have Launched 'TEX34αIII', A New Twin Screw Extruder System

Date: 2018-12-03
Views: 393

JSW have launched 'TEX34αIII', a new twin screw extruder system

 Booth Number:B370


JSW have launched a new model of 'TEX-αIII' Twin Screw Extruder series, "TEX34αIII" which have pursued a high performance to redefine "the high performance small-sized extruders" in market.


This extruder is a successor of TEX30α, have been developed based on the JSW's extrusion technology and its functions have been expanded for our customers' needs.


JSW have launched 'TEX34αIII', a new twin screw extruder system

TEX34αIII-52.5BW-2V (Built-in model, L/D=52.5)


Length: approx. 4,250 mm

Width: approx. 1,250 mm (incl. invertor panel)

Center height: approx. 1,200 mm

Weight: approx. 3,500 kg


Further various line-up of extruder models


"TEX34αIII" is newly added to "TEX-αIII" line-up and can provide an optimized performance as small-sized extruder for small-lot production lines.


Easy working property (development from conventional structure)


EZ-Change tie-bar system has been adopted for barrel connection. Barrel exchanges can be done more easily.


Two type models for matching applications and needs


Two type models, a standard model and a built-in model, are available for various customer needs.


The standard model is suitable for customizing extruder specs such as multiple vents, long L/D ratio and high screw speed (3-type of motor capacities are available). Furthermore it can be applied to explosion proof requirement.


The built-in model has a built-in control cabinet in its frame and allows you to save installation space and installation work time.


Specification


Basic specifications
Model
Built-in modelStandard model
Torque density
Nm/cm318.2
TorqueNm982
Nominal diameter
mmφ34
Screw diametermmφ36
Extruder
Motor capacity
kW37375575
Screw speed*1rpm37~363~56837~363~56854~541~84773~735~1,150
Heating / cooling*2
AW / BWAW / BW / SW / (O)
Screw configuration

Customizable
Barrel configuration

Customizable
Barrel connection
EZ-change tie-bar type
L/D ratio
52.5max. 77
Construction

Box type
JSW have launched 'TEX34αIII', a new twin screw extruder system
Single frame type
JSW have launched 'TEX34αIII', a new twin screw extruder system
Center height
mm1,200nominal 900 (customizable)
Control & Operation panel
Control panel

Built-in *3Separated
Operation panel

Built-inOn-frame / Built-in control panel / Stand alone
Others
Explosion proof

N/AAvailable

*1:Displayed min.~torque const.~power const.
*2:A;aluminium cast heater, B;brass cast heater, S;steam heating, (O);oil heating, W;water cooling
*3:For hazardous areas, the customized model may be applied.



Variety of accessories


JSW offer full line of compound system, from material feeders to pelletizing device.


Especially 'J-NX series' weighing feeders can be integrated through our original control system 'EXANET', which allows customers to have an integrated operational control.


Other JSW's technology such as data logging system "NET100" also accelerate data analysis.


Options


Compact weighing feeder (J-NX series and others), side feeder (TSF30), side feeder deaerator (SFD-30E), barrel cooling water unit, vacuum pump, strand bath, strand pelletizer, gear pump, under water pelletizer with pellet conveying water system and screen changer, etc. Ask JSW representatives for more details.


Other applicable options


Screw element (incl. TKD), long hopper barrel, long vent barrel, NIC barrel, dewatering barrel, side vent, operation data logging system "NET100", extrusion simulation software "TEX-FAN"*1, screw design software "TEX-GEO" and screw element manage software "TEX-GEO LIST"*2, etc.
*1: TEX-FAN bundles "TEX-GEO" and "TEX-GEO LIST".
*2: TEX-GEO LIST is bundled in "TEX-GEO".



News / Recommended news More
2019 - 08 - 15
Typical MIM parts used in disposable surgical instruments and assembled in a clean room. (Image from Micro)Metal injection molding (MIM) works well for high-volume production of small, complex medical device parts of consistent quality.Demand for small, lightweight, high-strength, complex-shaped components is growing across industries today, from automotive, consumer electronics, aerospace and def...
2019 - 08 - 08
3D printing requires materials called filaments that are rolled onto spools. Source: Dremel Shop3D printing is a great entry point into manufacturing, especially if you’re looking to print small amounts of intricate designs. Here’s what you need to know about 3D printing to help you decide if it works for your ideas.ProsLow entry cost. You can spend as much money as you want to get into 3D printin...
2019 - 08 - 02
Production of components via powder metallurgy has many potential advantages when compared to producing them via conventional methods, such as machining from billets. Some of these advantages include: 1. Huge potential savings in production by using powder metallurgy which is geared towards mass production 2. The flexibility to produce compositions not possible by other methods e.g....
2019 - 07 - 31
CANBERRA, July 31 (Xinhua) -- Australia's Minister for Industry has said 3D printing, food processing and nanosatellites could be the future focus of Australian manufacturing.Karen Andrews, the minister for industry, science and technology, on Wednesday convened a meeting of business groups, the nation's largest manufacturers and the Commonwealth Scientific and Industrial Research Organisation (CS...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone