• 30000

    Exhibition Area(sq.m)

    Exhibition Area(sq.m)
  • 1500

    Booths

    Booths
  • 500

    Global Exhibitors

    Global Exhibitors
  • 25000

    Global Visitors

    Global Visitors
About PM CHINA  Let you know our exhibition information
News / News
Industry News |Metal injection molding vs. machining: When MIM is best
Typical MIM parts used in disposable surgical instruments and assembled in a clean room. (Image from Micro)Metal injection molding (MIM) works well for high-volume production of small, complex medical device parts of consistent quality.Demand for small, lightweight, high-strength, complex-shaped components is growing across industries today, from automotive, consumer electronics, aerospace and defense to orthodontics and medical devices.Traditional machining and injection molding each has its pros and cons in producing components for medical devices, especially where parts may be smaller and require more maneuverability. Metal injection molding (MIM) is a hybrid technology that integrates the shaping capability of plastic injection molding and the materials flexibility of conventional powder metallurgy. Material selection, part size, volume and tolerance are all instrumental factors in the decision-making process.MaterialsMIM is a process like plastic injection molding but with me...
2019 - 08 - 15
Industry News | Pros and Cons of 3D Printing
3D printing requires materials called filaments that are rolled onto spools. Source: Dremel Shop3D printing is a great entry point into manufacturing, especially if you’re looking to print small amounts of intricate designs. Here’s what you need to know about 3D printing to help you decide if it works for your ideas.ProsLow entry cost. You can spend as much money as you want to get into 3D printing – and if that’s not a lot, you’ve still got plenty of options. A desktop 3D printer and a filament supply will set you back exponentially less than an injection molding setup, and the ongoing proliferation of open-source software and hardware in the community gives you a great support network of others who can help you along the way at little to no cost.Easy to make changes. Because of its additive nature, you can spot and fix issues with your design while your model is being made. This makes it possible to avoid wasting an entire run of material on objects that all have the same flaw. 3D pr...
2019 - 08 - 08
Powder Metallurgy - Advantages of Powder Metallurgy over Conventional Metal Fabrication Techniques
Production of components via powder metallurgy has many potential advantages when compared to producing them via conventional methods, such as machining from billets. Some of these advantages include: 1. Huge potential savings in production by using powder metallurgy which is geared towards mass production 2. The flexibility to produce compositions not possible by other methods e.g. metals and non-metals, as well as metal-metal combinations 3. Powder metallurgy is a near nett shape forming process, meaning that in many cases no finishing operations are requited. Further the dimensional accuracy possible is quite high 4. Raw materials easily obtainable and relatively inexpensive 5. Repeatability across parts is normal meaning consistent properties and dimensions for components 6. The number of operations required to produce a finished part is often less than other fabrication methodologies 7. Parts can be manufactured with controlled porosity...
2019 - 08 - 02
Industry News|3D printing, food, space among future of Australian manufacturing: industry minister
CANBERRA, July 31 (Xinhua) -- Australia's Minister for Industry has said 3D printing, food processing and nanosatellites could be the future focus of Australian manufacturing.Karen Andrews, the minister for industry, science and technology, on Wednesday convened a meeting of business groups, the nation's largest manufacturers and the Commonwealth Scientific and Industrial Research Organisation (CSIRO) to discuss the future of the industry.Speaking to Fairfax Media prior to the meeting, she said that she wants advice from the experts on where the sector should be in 10 years.'Australia will always be a manufacturing nation. What we need to do is look at the future of manufacturing in Australia. Where are our strengths and where are our opportunities?' she said.'We can't continue to try and be all things to all people.'She said that she was going into the meeting with an open mind but has previously been advised that space was an emerging area in the form of nanosatellites.The manufactur...
2019 - 07 - 31
Industry News | 3D Printing vs Injection Molding – Know the Differences Pt.1
3D printing and injection molding may be vastly different processes, but both hold valuable places in manufacturing.The BasicAn injection-molded part alongside a 3D Benchy, mid-print. Source: injectionmouldingparts.com, Emmett Grames / All3DP3D printing and injection molding have a lot in common. Both are manufacturing processes meant to make a designer’s vision a reality as painlessly as possible, and both are great at producing prototypes or replacement parts, among many things. But although they get you the same result, they are vastly different processes.First of all, 3D printing is an additive process. It manufactures objects by building them up layer by layer. You can watch this build process as it happens, which is useful when you’re testing a new design.Injection molding makes use of molds (as you may have guessed from the name). First, an object’s inverse is carved out of a material that is safe to handle the molten build material (the material the finished object is made of)....
2019 - 07 - 25
Industry News |Powder Metallurgy Components Market – Overview
Powder metallurgy is used to process powdered feedstock to manufacture various types of components across several industries globally. Powder metallurgy is a preferred manufacturing process for various structured parts due to its cost effectiveness. These components are used in various applications such as transmission components, belt pulleys, and engine parts. Powder metallurgy components are also utilized to manufacture filters that require greater strength and shock resistance. These components are employed in the production of machinery parts such as gears, bushes, bearings, sprockets, rotors, and magnets. Additionally, powder metallurgy components are used to manufacture hardware, business machines, household appliances, industrial motors, hydraulics, and hand tools. Rapid technological advancements in electronic and computer components is likely to increase the demand for aluminum and titanium-based powder metals during the forecast period. Based on product, the powder meta...
2019 - 07 - 16
Successful Conclusion of PM CHINA 2019
The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides was successfully held at Shanghai World Expo & Convention Center from March 25th to 27th! In the three days exhibition, buyers from all over the world came back with fruitful results, while exhibitors met with valued business parner.For international exhibitors, participating in the exhibition for powder metallurgy, cemented carbide and advanced ceramics is not a temporary decision, but a wise move to reach Chinese consumers. For Chinese companies, relying on the exhibition platform to display corporate image and seek new trading partners and business opportunities is not an expedient measure, but a long-term consideration enter the world.Daily professional visitor admission data for this exhibition:First day: 10,386 Second day:  9,290 Last day:  2,961The total exhibition area is 25,000 sqm,a rise of 12% over the previ...
2019 - 03 - 28
The Heat on the Second Day of PM CHINA 2019 Was Still Growing
On the first day of The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides, a total of 10,386 professional buyers at home and abroad were received.On March 26, the second day of the exhibition, the number of visitors reached 9,290. Visitors maintained high enthusiasm, while the scene remained an orderly manner.On site the exhibition, the latest products and technologies were showcasing. There are high-tech intelligent mechanical equipment, new type of materials and high-proformance products, etc.The three days event is full of expectations from visitors and exhibitors.Korea Advanced Ceramic Industry Delegation organized more than 30 delegates to come visit, which become a highlight of today's show. The China-Korea Advanced Ceramic Industry Exchange Meeting was held in the afternoon, the two sides had meaningful and thoughtful exchanges o...
2019 - 03 - 27
Industry News |Metal injection molding vs. machining: When MIM is best
Typical MIM parts used in disposable surgical instruments and assembled in a clean room. (Image from Micro)Metal injection molding (MIM) works well for high-volume production of small, complex medical device parts of consistent quality.Demand for small, lightweight, high-strength, complex-shaped components is growing across industries today, from automotive, consumer electronics, aerospace and defense to orthodontics and medical devices.Traditional machining and injection molding each has its pros and cons in producing components for medical devices, especially where parts may be smaller and require more maneuverability. Metal injection molding (MIM) is a hybrid technology that integrates the shaping capability of plastic injection molding and the materials flexibility of conventional powder metallurgy. Material selection, part size, volume and tolerance are all instrumental factors in the decision-making process.MaterialsMIM is a process like plastic injection molding but with me...
2019 - 08 - 15
Industry News | Pros and Cons of 3D Printing
3D printing requires materials called filaments that are rolled onto spools. Source: Dremel Shop3D printing is a great entry point into manufacturing, especially if you’re looking to print small amounts of intricate designs. Here’s what you need to know about 3D printing to help you decide if it works for your ideas.ProsLow entry cost. You can spend as much money as you want to get into 3D printing – and if that’s not a lot, you’ve still got plenty of options. A desktop 3D printer and a filament supply will set you back exponentially less than an injection molding setup, and the ongoing proliferation of open-source software and hardware in the community gives you a great support network of others who can help you along the way at little to no cost.Easy to make changes. Because of its additive nature, you can spot and fix issues with your design while your model is being made. This makes it possible to avoid wasting an entire run of material on objects that all have the same flaw. 3D pr...
2019 - 08 - 08
Powder Metallurgy - Advantages of Powder Metallurgy over Conventional Metal Fabrication Techniques
Production of components via powder metallurgy has many potential advantages when compared to producing them via conventional methods, such as machining from billets. Some of these advantages include: 1. Huge potential savings in production by using powder metallurgy which is geared towards mass production 2. The flexibility to produce compositions not possible by other methods e.g. metals and non-metals, as well as metal-metal combinations 3. Powder metallurgy is a near nett shape forming process, meaning that in many cases no finishing operations are requited. Further the dimensional accuracy possible is quite high 4. Raw materials easily obtainable and relatively inexpensive 5. Repeatability across parts is normal meaning consistent properties and dimensions for components 6. The number of operations required to produce a finished part is often less than other fabrication methodologies 7. Parts can be manufactured with controlled porosity...
2019 - 08 - 02
Industry News|3D printing, food, space among future of Australian manufacturing: industry minister
CANBERRA, July 31 (Xinhua) -- Australia's Minister for Industry has said 3D printing, food processing and nanosatellites could be the future focus of Australian manufacturing.Karen Andrews, the minister for industry, science and technology, on Wednesday convened a meeting of business groups, the nation's largest manufacturers and the Commonwealth Scientific and Industrial Research Organisation (CSIRO) to discuss the future of the industry.Speaking to Fairfax Media prior to the meeting, she said that she wants advice from the experts on where the sector should be in 10 years.'Australia will always be a manufacturing nation. What we need to do is look at the future of manufacturing in Australia. Where are our strengths and where are our opportunities?' she said.'We can't continue to try and be all things to all people.'She said that she was going into the meeting with an open mind but has previously been advised that space was an emerging area in the form of nanosatellites.The manufactur...
2019 - 07 - 31
Industry News | 3D Printing vs Injection Molding – Know the Differences Pt.1
3D printing and injection molding may be vastly different processes, but both hold valuable places in manufacturing.The BasicAn injection-molded part alongside a 3D Benchy, mid-print. Source: injectionmouldingparts.com, Emmett Grames / All3DP3D printing and injection molding have a lot in common. Both are manufacturing processes meant to make a designer’s vision a reality as painlessly as possible, and both are great at producing prototypes or replacement parts, among many things. But although they get you the same result, they are vastly different processes.First of all, 3D printing is an additive process. It manufactures objects by building them up layer by layer. You can watch this build process as it happens, which is useful when you’re testing a new design.Injection molding makes use of molds (as you may have guessed from the name). First, an object’s inverse is carved out of a material that is safe to handle the molten build material (the material the finished object is made of)....
2019 - 07 - 25
Industry News |Powder Metallurgy Components Market – Overview
Powder metallurgy is used to process powdered feedstock to manufacture various types of components across several industries globally. Powder metallurgy is a preferred manufacturing process for various structured parts due to its cost effectiveness. These components are used in various applications such as transmission components, belt pulleys, and engine parts. Powder metallurgy components are also utilized to manufacture filters that require greater strength and shock resistance. These components are employed in the production of machinery parts such as gears, bushes, bearings, sprockets, rotors, and magnets. Additionally, powder metallurgy components are used to manufacture hardware, business machines, household appliances, industrial motors, hydraulics, and hand tools. Rapid technological advancements in electronic and computer components is likely to increase the demand for aluminum and titanium-based powder metals during the forecast period. Based on product, the powder meta...
2019 - 07 - 16
Successful Conclusion of PM CHINA 2019
The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides was successfully held at Shanghai World Expo & Convention Center from March 25th to 27th! In the three days exhibition, buyers from all over the world came back with fruitful results, while exhibitors met with valued business parner.For international exhibitors, participating in the exhibition for powder metallurgy, cemented carbide and advanced ceramics is not a temporary decision, but a wise move to reach Chinese consumers. For Chinese companies, relying on the exhibition platform to display corporate image and seek new trading partners and business opportunities is not an expedient measure, but a long-term consideration enter the world.Daily professional visitor admission data for this exhibition:First day: 10,386 Second day:  9,290 Last day:  2,961The total exhibition area is 25,000 sqm,a rise of 12% over the previ...
2019 - 03 - 28
The Heat on the Second Day of PM CHINA 2019 Was Still Growing
On the first day of The 12th Shanghai International Exhibition for Advanced Ceramics, Powder Metallurgy and Cemented Carbides, a total of 10,386 professional buyers at home and abroad were received.On March 26, the second day of the exhibition, the number of visitors reached 9,290. Visitors maintained high enthusiasm, while the scene remained an orderly manner.On site the exhibition, the latest products and technologies were showcasing. There are high-tech intelligent mechanical equipment, new type of materials and high-proformance products, etc.The three days event is full of expectations from visitors and exhibitors.Korea Advanced Ceramic Industry Delegation organized more than 30 delegates to come visit, which become a highlight of today's show. The China-Korea Advanced Ceramic Industry Exchange Meeting was held in the afternoon, the two sides had meaningful and thoughtful exchanges o...
2019 - 03 - 27
News Let you know our latest information
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone

进入手机网站