News

News

Industry News | Controlling Metal Magnetism with Lasers

Date: 2020-06-24
Views: 230

By controlling the speed and power of lasers used in 3D printing, a research team in Switzerland reports a method to create novel metal alloys with complex, tailored geometries and functionality.


In a proof-of-concept study that the researchers say may be applicable to a range of metal alloys, they used additive manufacturing (AM) to make a 4×4-mm piece of steel alloy with a chessboard pattern of magnetic and nonmagnetic squares. The team includes co-authors Christian Leinenbach, Ariyan Arabi-Hashemi and colleagues at Empa, the Swiss Federal Laboratories for Materials Science and Engineering.


According to Leinenbach, parts much larger than their chessboard are possible. The scientists chose this particular configuration, he says, because it was more easily characterized with a microscope—and they were running of steel-powder starting material.


Stronger than steel

The work, Leinenbach explains, began as a contract research project for a Swiss company that wanted to find ways to use its high-nitrogen steel (HNS) product. This type of stainless-steel, he says, is commercially valuable in part due to its high strength and ductility and resistance to corrosion.


Because HNS uses nitrogen instead of the nickel commonly used in steel alloys, it is also allergy free, Leinenbach says. The metal thus has potential for products that have sustained contact with the body, for example, some medical devices or even jewelry.


But HNS is an exceptionally hard metal and difficult to machine using conventional methods, Leinenbach says. The Empa team, then, set out to develop an AM process for making things with HNS. The challenge was to prevent evaporation of volatile nitrogen because, like nickel, it stabilizes a crystal structure of steel characterized by its nonmagnetic properties.


Stabilizing with nitrogen

Steel comes naturally in two different crystal structures, Leinenbach explains. The so-called ferrite type is magnetic and found in lower-quality construction steel, whereas austenite steel is nonmagnetic and found in stainless steels.


“We need a certain amount of nitrogen to stabilize the nonmagnetic crystal structure,” Leinenbach says. “If the N value is too low, the crystal structure changes to the magnetic one.”


For the AM process, he adds, “We knew there was a very big risk we would lose the nitrogen.” That can happen in both the laser power bed fusion (LPBF) or electron beam melting AM processes, both of which allow layer-by-layer building of parts from powdered-metal starting material, he says.


Controlling volatile elements

The key, Leinenbach says, rests with the so-called melt pool from the powdered metal. The size and lifetime of the pool—that is, the milliseconds it takes for the pool to consolidate—impact the evaporation of nitrogen or other volatile elements and so, too, the alloy’s post-processing microstructure. By adjusting the AM laser’s scan velocity and power, however, the melt pool and nitrogen content of the alloy can be tailored and controlled throughout the build process.


Discovering they could control rather precisely how much nitrogen from the steel was lost in the process—thereby impacting whether the magnetic or nonmagnetic crystal structure was being stabilized—was a complete surprise for the team, Leinenbach says.  


“We expected the nitrogen to evaporate,” he says. “The surprise was the magnetism—that we can totally tailor it.”


And it is not just a simple on/off functionality, Leinenbach says.  By programming the speed and power of the laser, “We can have a controlled amount of magnetic phase. We can adjust how much magnetism there will be in the final product [and where].”


AM gets real

Leinenbach says it is important to note that “AM has evolved into a real manufacturing technology, especially for products with complex geometries or functionalities.” He offers the example of aero-engine fuel-injector nozzles that have many complex parts. Many manufacturing steps are avoided in making these aero-engine parts today by using AM instead of conventional machining, he says.


A possible application of controlled functionality/magnetic phase with AM, Leinenbach says, might be electric cars. They can be made more efficient either through better batteries or better motors, he says. With an AM process to control magnetic phase, rotor designs could be optimized yielding much greater operating efficiencies than possible with conventional motors, he says.


Future shapes

In terms of other functionalities, Leinenbach says, there is potential for any metal alloy in which a volatile element impacts functionality like magnetism in a phased manner.


He cites nickel-titanium shape-memory alloys with thermo-mechanical properties. These are metals that can be twisted and bent but when dropped in hot water, for example, revert to their original shape. Slight changes in titanium content are the controlling factor.


 Leinenbach envisions shape-memory alloys so exquisitely tuned through AM control of titanium content that they could be activated upon insertion in the human body—perhaps with a variety shapes programmed into the LPBF process.


“Alloy composition determines when the shape memory effect will start,” Leinenbach says.


Via: https://www.osa-opn.org/

Note: Content may be edited for style and length.


News / Recommended news More
2020 - 07 - 02
Additive manufacturing (AM) is a technology that is best suited for making customized parts that are tailor-made for specific geometries and specifications. In situations where a person has faced severe injuries whether from accident or military action may require reconstructive surgery for getting back to normal life. In such situations, such parts can be reconstructed using titanium or stainless...
2020 - 07 - 02
Recreating Damascus steel remains a holy grail of materials science. The exact process and alloys used are long ago lost to time. At best, modern steelworking methods are able to produce a rough visual simulacra of sorts that many still consider to be pretty cool looking. Taking a more serious bent at materials science than your average knifemaker, a group of scientists at the Max Planck institute...
2020 - 07 - 02
The BMW Group has opened a new €15 million additive manufacturing facility which is designed to “industrialize 3D printing,” and shorten production times across the company.  Based in Munich, the campus will bring BMW’s prototype production, series parts manufacturing, research into new 3D printing technologies, and training, together under one roof. The centre will also house around 50 ...
2020 - 06 - 24
By controlling the speed and power of lasers used in 3D printing, a research team in Switzerland reports a method to create novel metal alloys with complex, tailored geometries and functionality.In a proof-of-concept study that the researchers say may be applicable to a range of metal alloys, they used additive manufacturing (AM) to make a 4×4-mm piece of steel alloy with a chessboard pattern...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone