News News
Success and growth depend on constant innovation to stay ahead of the competition. In fact, we found that ten times more is spent on R&D than on advertising around the world today. But for many traditional manufacturers, adopting digital technology in their workflows can still be seen as an insurmountable challenge, with major financial implications that are not always realistic, leaving them struggling to know how to compete.This can be particularly true of the automotive industry, largely due to the higher number of parts required in production. Leading automotive manufacturers are relying on additive manufacturing (AM) to not only accelerate the product development cycle but also to reduce resources such as time and energy. Additive manufacturing is already transforming automotive p...
Relese time: 2020 - 07 - 09
Views:225
One of the disadvantages of modern industrial technologies for laser three-dimensional printing is strong heating at the point of contact of the metal with the laser light beam. This heating melts the metal powder, but it also leads to the appearance of areas of internal mechanical tension and deformation of the workpiece. And all these things are practically impossible to predict, which makes it impossible to somehow compensate for them.
Relese time: 2019 - 12 - 27
Views:247
Powder metallurgy was practiced long before ancient artisans learned to melt and cast iron. Egyptians made iron tools using PM techniques back in  3,000 B.C. The ancient Incans made jewelry and artifacts using precious metal powders. The first modern PM product were the tungsten filaments for electric light bulbs developed in the early 1900s. These were followed by tungsten-carbide cutting tools and self-lubricating bearings in the 1930s; automobile parts in the ’60s and ’70s;
Relese time: 2019 - 12 - 06
Views:242
There are several types of additive manufacturing and many applications, but the main principle is commonly known as 3D printing. This is where layers upon layers of material are stacked and fused on top of each other to form a product, and controlled digitally by 3D software.
Relese time: 2019 - 11 - 29
Views:242
India’s manufacturing sector is growing to become the fifth largest in the world by 2020. Aided by the Indian government’s initiative of ‘Make in India’, the nation’s vision is to make the country a global manufacturing hub. A resource-rich nation with respect to material and skilled manpower, the country seeks indigenous innovation to create a stimulating landscape of growth.
Relese time: 2019 - 11 - 11
Views:249
Cement is used in almost all outlets of construction. From schools to roads to dams to houses, cement is the second most-consumed resource in the world. Consequently, all the cement used in the world contributes to approximately eight percent of all global carbon emissions. Moreover, cement contributes to flooding, water pollution, and soil erosion. While cement industries around the world have promised to decrease their net carbon emissions, cities and countries are beginning to seek different venues for infrastructure. Most notably, Dubai looks to implement its idea of the 3D ...
Relese time: 2019 - 11 - 07
Views:272
Total67Pages5/14FirstPrev12345678910...NextLast
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone