News

News

Concurrent Activity |2019 China Summit Forum on Cutting-edge Technology Application and Development

Date: 2019-02-26
Views: 161

 

 

Organizing Committee:

Industrial Ceramics Committee of Chinese Ceramic Society

Organizing Committee of Summit Forum on Cutting-edge Technology Application and Development in Advanced Ceramic Industry

Uniris Exhibition Shanghai Co., Ltd.

 

2019 China Summit Forum on Cutting-edge Technology Application and Development in Advanced Ceramic Industry & Academic Annual Meeting of the Industrial Ceramics Committee of Chinese Ceramic Society will ceremoniously be held on March 24th, 2019 at Howard Johnson Peace Hotel Shanghai.


The forum is closely related to the most popular and concerned topics in the field of advanced ceramics: key processes and technical bottlenecks in the preparation of ceramic materials, new products and applications, industrial upgrading and development of new markets, etc. The organizers will invite academicians of China Engineering Academy, professors from well-known universities and research institutes, and industrial professionals to systematically analyze market demand and future trends, explore research and development directions, and point out the emphasis and difficulties. This is not only a high-level annual technical achievement and academic exchange conference, but also a summit forum focusing on the advanced ceramic materials and industrial development.

 

 

1.Schedule:

Registration Time: March 23rd, 2019

Date & Venue:  

8:30 AM - 6:00 PM, March 24th, 2019

Howard Johnson Peace Hotel Shanghai

(No. 2651, Hunan Road, Putong New Area, Shanghai)

 

2. Special Guests


Guest Hosts


Mr. Wu Jianfeng

Professor and Ph.D. Supervisor at

State Key Laboratory for Ceramic Construction Material

Vice-Chairman at

Ceramic Branch of The Chinese Ceramic Society    



Mr. Xie Zhipeng

Vice-directors at

State Key Laboratory for New Ceramics and Fine Processing    

Professor and Ph.D. Supervisor at

School of Materials Science and Engineering, Tsinghua University


Report Guests


Mr. Wang Dongliang

Academician at

China Engineering Academy

Ph.D. Supervisor at

Shanghai Institute of Ceramics, Chinese Academy of Sciences  

Topic:

Cutting-edge Technology Development and Key Science and Technology Issues in Advanced Ceramic Industry


Mr. Zhang Lianmeng  

Academician at

China Engineering Academy

Chair Professor at

School of Materials Science and Engineering, Wuhan University of Technology    

Topic:

Design, Preparation and Application Development of Functionally Gradient Ceramic Materials


Mr. Huang Zhengren

Director, Professor and Ph.D. Supervisor at

Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences  

Topic:

Structural Performance Control and Preparation Technology and Industrial Application of High-end Silicon Carbide Ceramics


Mr. Zhang Weiru

President at

Sinoma Advanced Materials Co., Ltd.  

Topic:

Development of Non-destructive Testing of High Performance Silicon Nitride Ceramic Sintering Preparation Technology


Mr. Zhang Guojun

Professor and Ph.D. Supervisor at

Research Institute for Function Materials, DONGHUA University  

Topic:

Analysis and Study from Home and Abroad on Sintering Activity and Densification Process of Ceramic Powders


Mr. Xiao Hanning

Board Chairman at

Professional Committee for Construction Ceramics  

Topic:

Porous Ceramic Microstructure Control Technology and Its Application in Environmental Protection and Electronic Cigarette


Mr. Wang Shiwei

Professor at

Shanghai Institute of Ceramics  

Topic:

New Progress in Research Status and Preparation Technology of Transparent Ceramic Materials


Mr. Yang Shuangjie

Deputy General Manager at

Mobile Business Division, Chaozhou Three-Circle (Group) Co., Ltd.

Topic:

New Technology of Zirconia-based Color Powder and Color Ceramics for 5G Mobile Phone Back Plate


Mr. Liu Jihong

Engineer at

Mobile R&D Department, Beijing Xiaomi Technology Co., Ltd.    

Topic:

Application of Zirconia Materials in Xiaomi Mobile Phone


Mr. Gao Longqiao

General Engineer at

The 12th Research Institute of China Electronics Technology Group Corporation  

Topic:

Advancement of China's Ceramic-metal Sealing Technology


Mr. Yang Libao

President at

Equipment Research Institute, JIMEI University  

Topic:

Application of 3D Printing Near Net Shape Technique for Complex Structural Ceramic Components                                             

 


3.Registration Method and Fee:

Register Before March 10th: RMB2000/Per person

Register After March 10th: RMB2500/Per person

 

For detail application procedure, please contact:

Ms. Allison Ye: allison@unirischina.com

Ms. Echo Lu: echo.lu@unirischina.com



News / Recommended news More
2019 - 08 - 15
Typical MIM parts used in disposable surgical instruments and assembled in a clean room. (Image from Micro)Metal injection molding (MIM) works well for high-volume production of small, complex medical device parts of consistent quality.Demand for small, lightweight, high-strength, complex-shaped components is growing across industries today, from automotive, consumer electronics, aerospace and def...
2019 - 08 - 08
3D printing requires materials called filaments that are rolled onto spools. Source: Dremel Shop3D printing is a great entry point into manufacturing, especially if you’re looking to print small amounts of intricate designs. Here’s what you need to know about 3D printing to help you decide if it works for your ideas.ProsLow entry cost. You can spend as much money as you want to get into 3D printin...
2019 - 08 - 02
Production of components via powder metallurgy has many potential advantages when compared to producing them via conventional methods, such as machining from billets. Some of these advantages include: 1. Huge potential savings in production by using powder metallurgy which is geared towards mass production 2. The flexibility to produce compositions not possible by other methods e.g....
2019 - 07 - 31
CANBERRA, July 31 (Xinhua) -- Australia's Minister for Industry has said 3D printing, food processing and nanosatellites could be the future focus of Australian manufacturing.Karen Andrews, the minister for industry, science and technology, on Wednesday convened a meeting of business groups, the nation's largest manufacturers and the Commonwealth Scientific and Industrial Research Organisation (CS...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone