News

News

Industry News | Overall design considerations for 3D printing

Date: 2020-06-17
Views: 227

Designing for additive manufacturing (DfAM) can seem daunting. Often, the phrase DfAM is juxtaposed with images of complex lattice structures or forms that look more organic than mechanical. In reality, 3D printing is inherently a very forgiving process when it comes to design best practices. It can easily perform internal sharp corners, complex undercuts and even build a structure that would be fully inaccessible to traditional cutting or tooled manufacturing. This is what has made additive manufacturing a powerful tool for prototyping parts destined for injection molding or casting since it can handle a broad mix of design features.


So what should you know about DfAM? What design traits can become problematic for 3D printing? These design best practices apply to nearly all the common additive processes, from laser powder bed fusion (SLS, DMLM), to fused deposition modeling (FDM), to vat photopolymerization (SLA).


Minimum wall thicknesses should be larger than 0.6 mm (0.024”) on self-supporting features like X-, T-, O-, or C-like shapes. This gives the material, and its method of 3D fusion, enough real estate to successfully deposit. If there is an unsupported area or needs to bear a load, the wall should be double at 1.2 mm (0.048”) or above.


Clearance between features should be above 0.5 mm (0.020”) to allow gaps to resolve without neighboring materials bonding to each other unexpectedly.


Remove confined hollows allows for excess material removal. This can be printed support structure or unfused powders and resins. A balloon shape would be full of unused material without a means of removal. Adding ample exit holes for material clearing is needed. Often, parts can be digitally programmed to act hollow through modifications of material infill, which can create sparse geometric structures inside the part as it prints. Infill does not need to be designed in the part, the programming occurs during build preparation.


Design in escape holes to prevent trapped material that is difficult to clean. Many parts are cleaned with line-of-sight tools, bead blasting or liquid baths. Building exit channels, such as small perpendicular holes at the bottom of blind bosses, deep features or other gaps can help material freely exit while post-processing.


Fillet everything to mitigate acute stress points in the 3D printed parts. Fillets help evenly distribute strain load on a part and can generally make most features stronger. Fillets also tend to print more consistently versus sharp edges or corners.


Be mindful of cantilevers in the design that could easily break. A good rule of thumb is to think about holding a printed part from that cantilevered section, if you think the part will bend and break off, then you may want to reinforce that feature. Cantilevers grown vertically in a 3D build will be slightly weaker than those grown horizontally due to the layer-by-layer nature of 3D prints.


Design with even wall thicknesses as you would an injection molded part. Even walls help mitigate stress in the part while it is printing which can reduce twist or warping. In contrast, over-thick areas can build up a lot of stress, possibly deflecting thinner areas around the feature.


Provide the solid model, not just the STL, to your 3D printing service or internal manufacturing team. They have the right tools to convert the file and achieve the resolution you require without detail loss. Providing the solid model allows the operator to do any minor changes in a parametric environment – adding legacy to future prints.


Many of the tips above outline minimum requirements. The best tip of all is to give some factors of confidence in the design by not always modeling to the minimums.


Via: https://www.3dprintingmedia.network

Note: Content may be edited for style and length.


News / Recommended news More
2020 - 07 - 02
Additive manufacturing (AM) is a technology that is best suited for making customized parts that are tailor-made for specific geometries and specifications. In situations where a person has faced severe injuries whether from accident or military action may require reconstructive surgery for getting back to normal life. In such situations, such parts can be reconstructed using titanium or stainless...
2020 - 07 - 02
Recreating Damascus steel remains a holy grail of materials science. The exact process and alloys used are long ago lost to time. At best, modern steelworking methods are able to produce a rough visual simulacra of sorts that many still consider to be pretty cool looking. Taking a more serious bent at materials science than your average knifemaker, a group of scientists at the Max Planck institute...
2020 - 07 - 02
The BMW Group has opened a new €15 million additive manufacturing facility which is designed to “industrialize 3D printing,” and shorten production times across the company.  Based in Munich, the campus will bring BMW’s prototype production, series parts manufacturing, research into new 3D printing technologies, and training, together under one roof. The centre will also house around 50 ...
2020 - 06 - 24
By controlling the speed and power of lasers used in 3D printing, a research team in Switzerland reports a method to create novel metal alloys with complex, tailored geometries and functionality.In a proof-of-concept study that the researchers say may be applicable to a range of metal alloys, they used additive manufacturing (AM) to make a 4×4-mm piece of steel alloy with a chessboard pattern...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909 
E-mail:irisexpo@163.com
Guangzhou Branch
Tel:020-8327 6389
Email:pmchina@unifair.com
PM CHINA Official Website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone