Industry News | An Introduction to the Space Applications of Additive Manufacturing

Date: 2019-09-11
Views: 264

Industry News | An Introduction to the Space Applications of Additive Manufacturing

In the early days of additive manufacturing (AM), the technology was primarily focused on design and rapid prototyping applications. However, recent additive manufacturing is progressively being employed to create high-performance mechanical components from refractory and technical materials.

This is particularly common in space and aerospace engineering, where the combination of affordability, versatility, speed, and precision make additive manufacturing a desirable choice.

Its ability to print refractories in lightweight architectures makes it an appealing method, supplying high-temperature performance at a tiny proportion of the weight of traditionally fabricated refractory metal parts.

This article outlines the key strengths of AM compared to conventional subtractive manufacturing, and how these are being implemented to transform the landscape of space engineering.

NASA performed tests on a recent rocket injector design in 2013. During these tests, the subscale injectors, while burning hydrogen gas and liquid oxygen, were subjected to extreme temperatures greater than 3300 °C and extreme pressures for more than 46 seconds.

The tests were successful. An engineer supervising the tests explained that the new components ‘operated beautifully’, coping with the extreme conditions with no sign of failure. What is more outstanding is that these high-performance parts were each produced in a single-step additive manufacturing process.

The subscale injectors used for these tests by NASA previously were manufactured utilizing conventional ‘subtractive’ methods: machining and milling bulk material and joining parts together.

The previous injectors cost $10,000 a piece to manufacture, had four parts, and were made over six months. The additive manufacturing of the new injectors did not only produce functionally indistinguishable components but also achieved this in less than three weeks and at half the cost.

NASA’s fuel injectors are only one example of the multiple ways in which additive manufacturing technologies are being applied for space applications to enhance manufacturing efficiency and component performance.

The Advantages of Additive Manufacturing

There are many advantages of additive manufacturing when applied to space engineering. First of all, additive manufacturing makes the construction of geometrically complex components possible, which would alternatively need highly specialized methods of production.

Once requiring several distinct processing steps, components such as NASA’s rocket injectors can now be manufactured in one consistent AM process.

Produced using AM, Researchers at the German Aerospace Center recently developed and prototyped a reusable rocket engine. The new additively manufactured design decreased the weight by 10%, reduced the number of parts from 30 to one, and provided enhanced performance over the previous design.

Economic advantages are a further offering of additive manufacturing in comparison to conventional subtractive manufacturing methods. Practically eliminating the requirement for re-tooling or revision of manufacturing procedures for new parts, components can effectively be produced on-demand using a single machine, meaning that economy of scale is achieved much more easily.

AM can offer economy of scale for small unit volumes, frequently as low as one, meaning that manufacturers can order or produce components whenever they are required as opposed to ordering thousands of components to create economic efficiency.

Additive manufacturing is both a cost-efficient method of producing large quantities of aerospace components and producing highly customizable components.

Lastly, the critical benefit of utilizing additive manufacturing for space applications is that it can be employed to significantly decrease the mass of components.

Additive manufacturing methods can be utilized to conveniently hollow-out components with closed cells, pockets, and holes to drastically reduce the mass of components. In contrast, subtractive manufacturing almost always creates ‘solid’ components of uniform density.  

As an example, weight reductions of an astounding 70% have been evidenced for satellite components created by AM.4 This is not a trivial matter as the reduction of the mass of satellite components significantly decreases the amount of fuel needed to launch the satellite and to maneuver it upon reaching orbit.

The significance of shedding every gram possible in space applications can hardly be overstated. AM offers a means to decrease the mass of existing components without undermining performance. This is especially important when the generation of high-performance components from dense technical metals and refractories is required.

Additive Manufacturing Solutions for Space Engineering

There are very few components utilized in space technologies that would not benefit from a reduction in mass and enhanced turnaround times. As such, applications for AM in space engineering are virtually limitless.

AM is a chief candidate for the manufacture of satellite propulsion systems and rocket, shielding, and space vehicle components (for example, those utilized to clean up space debris).

Applying its years of expertise as an international leader in refractory metal solutions, H.C. Starck Solutions is redefining what is achievable with AM technology and the use of refractory metals in the space sector to stay ahead of the curve in the rapidly developing AM market. 

It is taking full advantage of the lightweight features offered by AM to provide refractory metal solutions to applications where they were not previously considered.

Following critical investment in the development of AM methodologies and expertise on various AM platforms, H.C. Starck Solutions has become an international leader in the use of AM techniques with an extensive range of refractory metals for high-performance applications in space engineering.

H.C Starck Solutions is skiLlful in the production of precisely engineered three-dimensional components from demanding materials such as tantalum, niobium, molybdenum, tungsten, and their alloys; with further metals available on request.

For printed part applications in space engineering, H.C. Starck Solutions also offers engineered AM feedstocks: high-density spheroidized refractory metal powders with finely tuned particle size distributions, along with wires specifically designed for various AM deposition techniques.


News / Recommended news More
2020 - 05 - 14
Ceramic 3D printing can be used in preparation of multifunctional ceramics with complex structure and high precision, and will be widely used in architecture, engineering, medicine, aerospace and more. In recent years, metal and plastic 3D printing companies is shifting to the ceramic materials field that has increasing demand for strong, tough and high temperature resistant parts, which promotes ...
2020 - 05 - 14
Advanced ceramics are widely applied in industry sectors, high-tech world and new industries. With annual growth rate of 8%, its market in China values hundreds of billions of CNY. In recent years, the acceleration of China’s high-end industries and new industries development, for example, advanced manufacturing, 5G communications, semiconductor equipment and chip packaging, 3D printing and new en...
2020 - 05 - 14
The East China Powder Metallurgy Technology Exchange Meeting, rotationally presented by the powder metallurgy societies in East China, has been successfully held for 17 years since 1982. It’s considered as one of the important platforms for China's powder metallurgy industry exchanges, and has actively promoted the flourishing development of the industry and related industries in East China and ev...
2020 - 05 - 14
MIM is currently the most scientific near net shape forming technology for metal parts formation. It can flexibly adjust to various performance indexes and has been successfully applied to popular areas such as auto parts, 3C digital, medical equipment and tool locks. Hence, traditional molding technologies such as CNC fine processing, to some extent, are being replaced. Although the future of MIM...
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch 
Tel: 4000 778 909
Guangzhou Branch
Tel:020-8327 6389
PM CHINA Official Website
Scan the QR code to visit the official website by phone